After having worked for some while on Octopi Dance, I decided I needed jellyfish to add to the flow of the piece. If you’ve been reading this blog for a while, you know I’m obsessed with creating a visual path through each quilt as a significant design feature. That can be done a number of ways, either through the background, the flora around your subjects, or with smaller objects that the eye follows across the piece.

For the octopi, jellyfish were a simple choice. They float and can be pointed in any direction. And the purple, green, and iridescent qualities are perfect against all that hot yellow.

What I really wanted after all that very solid garnet stitching was something translucent. I can do that fairly with organza and lace. But if I glue organza to the background, the background becomes a major part of the jellyfish. Some of the transparency is lost.

So I decided to make jellyfish with only the organza on the back. There are several ways to do that. One is to use a dissolvable stabilizer.

Dissolvable stabilizer is usually made from some kind of starch. There are a lot of brands but there are really only two types. One is see-through, and one looks like paper. They both dissolve in water. The see-through variety is usually a topping, put over your piece so you can embroider details without having your foot caught in the textures. It can also be worked in a hoop. If you want more information about dissolvable stabilizers, Embroidery Online has a wonderful article about them here.

The paper varieties don’t dissolve quite as well, but they make a better stabilizer for embroidery. Since I didn’t want to fuss with a hoop this time, I used a paper dissolvable called Paper Solvy, available at Amazon. It comes in a pack of 8.5″ x 11″ sheets.

It’s hard to make a stable embroidery just out of thread. You have to be sure you’ve connected all of it to itself, or it will fall apart when you remove the stabilizer. So I glued the organza onto the stabilizer with Steam a Seam 2, partially for color and partially to make the pieces more stable.

You can’t stitch as closely with this stabilizer. It will either tear or jam or both. I also ran a straight stitch around the outside of the pieces and then stitched my zigzag stitch over it. That holds the piece together better after the stabilizer is removed.

There are some good and bad things about this stabilizer It did dissolve quite well. It stitched fairly well, although I had a lot more thread breakage. And one was not enough.

I tried one set with a sheet of Tear Away behind the Solvy, and had to tear away that background. Not recommended. It took forever and it tended to tear away the stitches as well.

I’m quite happy with the ones I did on two layers of Paper Solvy. They dissolved well and the stitching stayed mostly in place. They can join in the dance,

For more information on the visual path check out Building a Path.