Steam a Seam 2

Leafmeal Lie: Making snippet scrap Leaves

| ellenanneeddy

I don’t follow trends well. If it interests me it interests me. If it doesn’t, it’s background noise. So the snippet thing just went right past me. It’s an interesting technique, but it didn’t work with what I was doing.

So I was working on Green Heron Hunting and I needed to do something different with the leaves. I’ve often used green sheers with stitching to create folliage.

snips arranged on Steam a Seam 2

But I wanted fall leaves. Small fall leaves. I didn’t want them to be detailed. Just bits of color. So for this, the snippet thing made sense. I sat down with a pile of hand dyed scraps, and cut some bits. I cut a cloud shape of Steam a Seam 2. I arranged the bits on to the Steam a Seam 2 backing and pressed them on high heat with a non-stick pressing cloth.

The trick with a pile of snippes is stitching them down without them getting caught in the darning foot or having them go all over. I’ve seen snippets done with tulle over them to control the bits. Personally, I don’t like the look. I can always see the tulle. It looks either too dark or too light and it spoils the effect for me. So i decided to stitch them down with a top layer of dissolvable stabilizer, to keep things from getting tangled.

Dissolvable stabilizers have been around for a while. They are a film made from cornstarch and dissolve in water. They have a lot of commercial uses for computerized embroidery, but they also work well for free-motion embroidery. I don’t know that they stabilize so much as they keep the machine feet from getting tangled in the thread and bits of fabric. Originally they showed up in the 80s as Brama Bags, a dissolvable laundry bag for hospitals, where they were concerned about contagion from people’s laundry. It’s only gotten better since then. There are lots of different brands. The difference is in how thick the film is and how easily it dissolves. I like Aqua Film, which is now called StitcH2O, by OESD. But there are also Solvey, and Badgemaster and new ones come out all the time. What you are looking for is a film that’s steady enough to stitch over without being too thick. Thick ones take forever to dissolve.

That made a tree top I could iron onto the piece itself. But I never trust glue. It sometimes just comes loose. So it needs to be stitched over. And all those little bits of fabric, even glued, are going to go everywhere. So this is where I used my Aqua Film. I pinned over a sheet of the film, and stitched it with a zigzag stitch and a metallic green/brown Metallic thread called FS2-20.

After all that stitching, I trimmed away any extra stabilizer.

I put it up on my photo wall, got out a spray bottle, and spritzed the stabilizer. It’s not instant. You need to get it really wet. But it dissolves. I put a fan on the piece and it was dry the next day. The color darkened a bit, but I’m still happy with the result.

So these trees work for me. The frogs and heron are so busy, there needed to be similar excitement going on up top.

I’ve also used dissolvable topping film for a technique I call globbing, where you stitch down a glob of thread onto a quilt. Just put the thread where you want it, pin the stabilizer on top, and stitch in circles until it’s significantly attached. They work well for stitching over delicate things like Angelina Fiber, where, again your pressure foot is likely to get caught. You can read about it in Another Fine Mess: Globbing, What’s on Your Floor

Hang ’em High: How To Make a rod Pocket without Hand Stitching

| ellenanneeddy

Every quilt you want to hang will need to have a rod pocket. The tradition is that you sew a tube and hand sew it on, I will never live that long. I hate to hand sew. It certainly would feel like I’d lived too long if I had to sew rod pockets that way.

Enter the wonderful world of glue. I’m a fond friend of Steam-a Seam for applique. But it has a version that comes in strips that makes a snap out of making a rod pocket.

Now we all know not to trust glue. It can, and will come loose at the most miserable times. I always stitch it down eventually for safety’s sake. But there are seams that take stress and seams that don’t. For a seam that has nothing pulling on it, you can fuse it and forget it. And a rod pocket has 2 hems and a seam that does not bear weight or take stress.

Each rod pocket is a rectangle that needs to be hemmed at the short sides and joined into a tube. It’s easy to do that with a strip of Steam a Seam 2.

It can be done in two pockets if you want a break in the center for a hanging hook.

What size should it be? Depends on your rods and depends on the size of your quilt. But I always go a bit wider than I think is needed. 6-8″ for something small. For a larger quilt, a 12″ pocket isn’t too big. If I cut the length of the rod pocket to the size of the quilt, by the time I fold over the two hems, it’s a perfect size to hold a rod without the rod peeking out.

I’ve put Steam a Seam 2 down both ends of the rod pockets and ironed the two hems. Then I’ve fold ed the rod pocket into thirds. I put Steam a Seam 2 on the folded up edge, and folded the other flap to meet. Iron it down and you have your rod pocket.

So now you have your pocket, without a stitch in it.

The rod pocket holds up the weight of the quilt, so it does need stitching to hold. But we can put it into place and baste it with the Steam a Seam 2 to prepare it for stitching.

I always stitch a rod pocket down, but I glue them first. I put two lines of Steam a Seam 2 down the length of the rod pocket. I center them on the back of the quilt on top and iron them down.

Then I put monofilament nylon or poly into both the top and bottom of my machine and set my stitch on a hemming stitch. I’ll need the hemming foot as well. It rides right along the edge of the pocket.

Set the hemming stitch just a bit wider than it sets for a regular hem. Stitch down one edge and then the other.

Will it show? Not very much. You might find the line of stitching where the hemming stitch is, but I guarantee you’ll have to look hard for it. Job done. Not a hand needle in sight.

For more information about Steam A Seam 2 check out Sun, Clouds, Water, and Rocks. You’ll find Steam a Seam 2 in 1/2″ strips at Amazon or at your local quilt store.

Good Bones: Rocks To Water

| ellenanneeddy
923-21 In the Reeds 2

Building something with dimension usually means it has a recognizable top and bottom. Design-wise, I believe you should be able to flip a piece on any side and have the design still move and work. But it loses a great deal of credibility if you have upside-down fish. It’s not a good look.

Be that as it may, it helps to have a recognizable border between sky, land, and water. How can we make those obviously separate, without just putting a line across it?

There are several subtle ways and some pretty direct ways.

Dyed cotton thread in the sky, thick metallic in the water

The easiest subtle way is to change the kind of thread you are using to stipple. Not the color necessarily. The kind of thread.

Threads separate in how they’re made and how much they shine. Metallic threads usually shine more than poly or rayon, certainly much more than cotton. Sliver-like threads that are flat tinsel shine the most. Next, come the twisted metallics like Supertwist. Then there are the wound metallics like Superior metallics.

Now, if water is shinier than air, and air is shinier than earth, you can separate them out by having different threads stippling the piece. I usually use Sliver or #8 weight metallic threads for water, and Supertwist for sky, and/ or earth. If they shine differently, your eye will automatically sort them out as different.

# eight weight metallic threads in water

But the best way I know to establish earth is rocks. This is not subtle. It’s an in-your-face statement of land. A pile of rocks at the water’s edge defines the water/earth border immediately. Ad it’s so easy to do.

I cut rocks out of leftover hand dye. I pick anything that is rock color, always adjustable to the color of the background, and cut a whole lot of rocks for when I need them. They’re backed with Steam-a-Seam 2 so I can move them around at will until I iron them down.

Fishy Business is a mostly water quilt. But a pile of rocks in one corner establishes the bottom of the pond. I may have globs of thread and some water ferns later to create more movement. Now all I want to do is establish a baseline with the rocks and start getting the water to flow.

I’m using soft edge applique techniques for this. Soft edge has no visible stitching or edge to it. Neither water or rocks are improved by having a hard applique edge around them. Instead, I’ll go around the edges with monofilament nylon and a zigzag stitch. There’s more information on, this in Sun, Clouds Water and Rocks.

I cut some elongated c shapes to make water from. Both in blue and green for the water and yellow for reflected sunlight.

You can see the progression on this in these shots. I started with a corner pile of rocks to establish the bottom of the pond. Then I added in the water ripples made of sheers backed with Steam-a-Seam 2. Since each fish I put in the water changes where the water ought to be, I’ve added them one by one and adjusted the water around them. I added sunlit water shapes across the middle.

I’m pleased with this so far. Nothing is sewn down yet, so I’ll leave it up and look at it in case it needs adjustment.

Having a sticky fusible like Steam-a-Seam 2 lets me design this way. When I’m ready, I’ll commit and iron it down. It’s a very fishy business after all.