light source fabric

Splitting the sky: The Advantage of Split Light Sources

| ellenanneeddy

I don’t piece well. It’s not my skill. Anything that takes accuracy and careful cutting really isn’t my skill. The new 770 Bernina came with a foot that does make it better, but I don’t normally do large pieced tops. I know better. It’s not pretty when I do.

But there are rare occasions when I piece a split light source top.

Why? Why walk into accuracy land and piecing?

A light source brings you fabric with direction, and a built-in world. That world can be integral by itself. But if you want to filter the light as if it were through haze, woods, or shadow, you can piece two light source fabrics to create that shaded look. There are several approaches, with different effects.

Vertical Piecing

Where the Heart is

Where the Heart Is was pieced from two separate yards of the same blue/orange color range. I lay both pieces together on the cutting board and cut them in gradated strips, 2″, 3″, 4″, etc. Then I sewed them together with the narrowest light of one to the widest side of the other, in gradation. Set in a vertical arrangement, it makes for light flowing through the trees.

Horizontal Piecing with a Frame

Envy

Envy was one horizontal light source yard, split in gradations with a half yard cut in 2″ strips put between. The piecing creates a sense of space. The narrowest strip in the gradation defines the horizon line.

Piecing within Multiple Frames

Sometimes I split the two fabrics with the light at the widest on one side and the dark widest cut so they can carry the light across the piece. Twightlight Time was also double framed with a 2″ and a progressive border. Having a narrower border on the top weights the bottom of the piece.

Piecing Machines

Lately, Don found me a Singer 99 at a yard sale. For those of you not familiar with these darlings, they are a featherweight industrial drop-in bobbin Singer. They only straight stitch, but the stitch is impeccable. They are tougher, and faster and they use bobbins that are still commercially available. I’d never seen one before, but I fell in love instantly. It took a little work and some creative parts searching, but Don got it working for me and it’s perhaps the best piecing machine I’ve ever had. Did I mention Don is my hero?

So I pieced the guinea hen’s background on it.

How do you keep it straight? It’s tricky. If I get them out of order the fabric doesn’t progress correctly through its colors. I make all my cuts, leave the fabric on the cutting board until I can number the pieces all on the back side. Since there are two pieces of fabric cut, I label my fabric, 1a,2a, etc. and 1b, 2b, etc. and chalk in the sequence on the ends so I can always keep them in order.

Expanding Fabric Size

Sometimes there’s just a beautiful fabric that needs to be bigger. That’s been known to happen too.

I needed a background for What the Flock, a grouping of guinea hens. I’m low on fabric and money right now, so I have to make do. I found a purple piece that should make a great meadow, but a yard was just a bit small. So I pieced in another half-yard to expand it. I cut the half yard in 2.5″ widths and graded the yard-long piece in segments of 9″, 8″, 7″, 6″, and 5″,

Seam Rollers

For those of you like me, who hate to run back and forth to the iron, there is a seam roller. You can use this gadget to flatten your seams right where you’re sewing. Roll it over the seam and you’ll have flat, ready-to-sew seams without the iron woman run.

I don’t piece often, but these backgrounds are worth it. I love the shaded light and the action of light of the fabric across the piece.

Splitting the sky: The Advantage of Split Light Sources

| ellenanneeddy

I don’t piece well. It’s not my skill. Anything that takes accuracy and careful cutting really isn’t my skill. The new 770 Bernina came with a foot that does make it better, but I don’t normally do large pieced tops. I know better. It’s not pretty when I do.

But there are rare occasions when I piece a split light source top.

Why? Why walk into accuracy land and piecing?

A light source brings you fabric with direction, and a built-in world. That world can be integral by itself. But if you want to filter the light as if it were through haze, woods, or shadow, you can piece two light source fabrics to create that shaded look. There are several approaches, with different effects.

Vertical Piecing

Where the Heart is

Where the Heart Is was pieced from two separate yards of the same blue/orange color range. I lay both pieces together on the cutting board and cut them in gradated strips, 2″, 3″, 4″, etc. Then I sewed them together with the narrowest light of one to the widest side of the other, in gradation. Set in a vertical arrangement, it makes for light flowing through the trees.

Horizontal Piecing with a Frame

Envy

Envy was one horizontal light source yard, split in gradations with a half yard cut in 2″ strips put between. The piecing creates a sense of space. The narrowest strip in the gradation defines the horizon line.

Piecing within Multiple Frames

Sometimes I split the two fabrics with the light at the widest on one side and the dark widest cut so they can carry the light across the piece. Twightlight Time was also double framed with a 2″ and a progressive border. Having a narrower border on the top weights the bottom of the piece.

Piecing Machines

Lately, Don found me a Singer 99 at a yard sale. For those of you not familiar with these darlings, they are a featherweight industrial drop-in bobbin Singer. They only straight stitch, but the stitch is impeccable. They are tougher, and faster and they use bobbins that are still commercially available. I’d never seen one before, but I fell in love instantly. It took a little work and some creative parts searching, but Don got it working for me and it’s perhaps the best piecing machine I’ve ever had. Did I mention Don is my hero?

So I pieced the guinea hen’s background on it.

How do you keep it straight? It’s tricky. If I get them out of order the fabric doesn’t progress correctly through its colors. I make all my cuts, leave the fabric on the cutting board until I can number the pieces all on the back side. Since there are two pieces of fabric cut, I label my fabric, 1a,2a, etc. and 1b, 2b, etc. and chalk in the sequence on the ends so I can always keep them in order.

Expanding Fabric Size

Sometimes there’s just a beautiful fabric that needs to be bigger. That’s been known to happen too.

I needed a background for What the Flock, a grouping of guinea hens. I’m low on fabric and money right now, so I have to make do. I found a purple piece that should make a great meadow, but a yard was just a bit small. So I pieced in another half-yard to expand it. I cut the half yard in 2.5″ widths and graded the yard-long piece in segments of 9″, 8″, 7″, 6″, and 5″,

Seam Rollers

For those of you like me, who hate to run back and forth to the iron, there is a seam roller. You can use this gadget to flatten your seams right where you’re sewing. Roll it over the seam and you’ll have flat, ready-to-sew seams without the iron woman run.

I don’t piece often, but these backgrounds are worth it. I love the shaded light and the action of light of the fabric across the piece.

Well, I’ll Be Dyed!

| ellenanneeddy
Three Point Landing

One of the not-so-secret elements of my work has been hand dyed fabric. I’ve dyed fabric literally since I was ten. I was working with melted crayons and Rit. The result almost made my father cry when he saw the midden in the sink, but I’ve been hooked ever since.

Why? Because nothing starts better original art than original art.

With the new studio in place, I’m ready to dye. Well, almost. We still need to freshen up the wringer washer and test the new mangle. But I have a dedicated kitchen space with a drain in the floor. What more could a girl want?

I put up Three Point Landing because it’s so dependent on the fabric. It’s a one piece background with around 15 colors in it. The colors make it all glow, sky, water and waterlily. The background, just one piece of fabric, makes it all happen.

When I dye fabric for a particular piece, I usually dye three pieces for the one I’ll use. One can be backing and one can be accessory, perhaps. But all three of them will be different in lovely amazing ways. And if I’m lucky, one will be just right.

Are there commercial fabrics like this? Somewhat. Caryl Bryer Fallert does a line of fabrics that simulated hand-dye quite well. But it’s reproduced. Which means it’s not a one of a kind.

I always have some really beautiful fabric that I don’t need to keep. I sold it in classes to students, because it’s cruel to tell them they can have results like yours without giving them similar supplies.

But there are always people who come back for hand dye. It’s beautiful, The colors are vivid. it’s needle ready, starched and shrunk, and no one has a piece just like yours. Each one is unique.

My first dye run will be naturally smaller than usual. But I am taking orders for people who would like fabric. Fabric is roughly 44″ wide, mercerized cotton. It comes in yard, half yard, and yard and a half lengths. I can either send an assorted box of fabric, or hand pick for you from what you tell me you want.

The fabric has a light source in it, usually. Built in sun or moon light spots that drive the visual action of your work from the start.

  • You can see the flower already started here.
  • Light pours through greenery

  • Greys from black
  • browns from complementary fabrics

Even blacks, greys and browns are vivid and exciting.

But if you ask me, I will dye what you want to your specs.

Fabric is $24 per yard. I ask that you buy at least $48 dollars worth of fabric. I do pack each box with an extra yard or two so you can pick and choose. You can send back what you don’t want. If you buy the whole box you get an extra half yard free.

I will have some extra fabric from the run, but I recommend that if you want fabric, email me or call me at 219-617-2021 and I will dye especially for your needs.

I expect to by dyeing around April 24th. Who wants fabric?