heron

Branching Out: A Tale of Two Branches

| ellenanneeddy

I’ve been waiting for a while to finish this quilt. Right now it’s all pinned together. All the components are finished, but not stitched down.

Branches are always hard for me. I’m more comfortable with leaves, but the leaves need to sit on something. And this heron needed a nice dead branch to stand on as she surveys her pond.

I think it’s harder because it’s more abstract. I’m not quite sure how to do the portrait of a tree. So I start with a shape, and I’m trying to make an interesting bark.

I’ve tried some slash applique for branches. I tried that first. I used two layers of hand dye with felt and Stitch and Tear as a stabilizer. I was trying to get the grain of the wood to wrap around the branch.

I stitched it down, straight stitch, trimmed out the shape, stitched in grain lines, and slashed the top layer. Then I hand ironed them with a point turner so they would stand upright, and stitched along the seam.

Once I sliced through the top layer, I roughed up the fabric with the edge of my mustache trimmer. The mustache trimmer was not on, but the blade on it made a nice surface to make the edges fray a bit.

I don’t consider it a success. I don’t like the shape and I don’t like the direction of the bark.

So I did it again. This time I used three layers of cotton, and stitched vertical lines much closer together. I didn’t really savage the upper layers. Instead, I sliced through them like chenille. I tried several methods but it really was easier just with scissors. I roughed it up with the trimmer as well.

This isn’t appliqued down yet, but I’m so much happier with it. The other branch will work in a forest floor piece, but not here.

Shadow on the shore: Making a shadow from Organza

| ellenanneeddy

For some while I’ve been wanting to make reflections in water, and work with shadows. I also have usually only done river and pond water. This image made me want to break out into shore surf. The heron has her wings up, so that they distort the shadow and the fish won’t see her.

I’m a bit uneasy about what the surf should look like. So I did some research. I love Japanese art, and looked through some imagery on waves on shore. Sometimes it helps to have a good idea what something looks like. These drawings were great waves. They gave me a place to start.

I broke down the drawings into simple shapes. And I cut them in a lot of different blues, and a specific glistening white.

But I needed to make the shadow. There may be more sophisticated ways to do this, but I traced the embroidery onto Steam a Seam 2.

I’ve changed backgrounds a lot on this. I finally settled on something a bit brighter, so you could see sand and sky.

The first one I cut was purple. It simply wasn’t dark enough.

Black glitter tulle worked better. I patted on some glitter tulle and cut the shape out.

I cut out wave shapes and layered them together.

The sky is pure sun headed into greenery, and I didn’t want to do something bold with it. Instead, I added spirals heading from gold to green to feel like the sun shimmering down.

I’m pleased with this although I haven’t ironed it down yet. The placing of the heron is really delicate. So I’m looking at it for a while before I commit.

Things to know about layering sheers:

Sheers may look different once you’ve ironed them. Have a test piece so you know what it will look like.

Your Steam a Seam 2 will make your needle skip if it’s not ironed down properly. That’s harder to do with multiple layers. And if you use lace the glue will come through

Layered sheers take more ironing to stick. But you don’t want to melt them. Use a no stick pressing cloth to iron them down and clean it after each piece is ironed. I use a non-stitck Scotch-Brite Scrubby. When you are all done, lay a piece of cotton scrap over the top of it and iron on hot. The excess glue will melt into the scrap. Make sure you don’t transfer glue from the scrap to your piece.

Sheers make wonderful shadows. I’ll stitch all this down with monofilament nylon so there are no hard edges, just shadow, sun and sea.

Filling the Space: Bobbin work as Stippling

| ellenanneeddy

This piece has been sidelined several times this year. I’m grateful to have it up on the wall ready to back and bind.

I’ve lately been hearing people saying, “Don’t stipple.” I couldn’t quite figure out what they were talking about. Stippling serves to anchor and detail the negative space in your work. One of the problems with intense embroidery is that you can’t just leave the fabric around it blankly unstitched. It looks very puffily unfinished if you do that.

The stipple also sets the shine for the piece. Depending on the threads you chose, the difference in the shine can help your eye separate sky from land and sea. The moon is stippled with monofilament nylon. All you see is the waves in it but no color change. The area around the heron is air, stippled with a multi-colored Madeira Super Twist.

The water stipple is with 8 weight metallic thread. Both the Supertwist and the thick metallic threads are stitched from the back. The 8 weight thread is too thick to go in the top so it’s in the adjusted bobbin. The Supertwist is a bit fragile, so it’s stitched from the back with a regular bobbin case.

The cool thing about stitching over the sheer overlays is that includes them in the water movement. I did not do that with the air overlays.

So what was that lady talking about? I finally figured it out. She was talking about that random puzzle piece kind of stipple. She is right. There are a million ways to stipple a piece. But that puzzle stipple does nicely in the air here. The thick and thin metallic threads separate water and air.

The stitching you use as stippling defines and fills the negative space in between your objects, giving them meaning that goes with their gorgeous looks.

If you are looking for other ways to stipple look up Leah Day’s 365 Free Motion Quilting Designs. It will give you all kinds of ways to add texture and free motion without the puzzle piece stipple pattern. It’s a brilliant book!

The Long and the Short of It: Blending Stitches with the Long Stitch

| ellenanneeddy

We’ve been talking about the variability of the zigzag stitch in free motion. Most of the time, I’m filling in a space where I want a line of color to show up. This is a trick that will give me a soft blend of color across the image without a hard line. I’ve heard it called the long stitch, although the old-fashioned description you hear with free motioners is the long short stitch. As with all free-motion zigzag stitching, the difference isn’t a setting on the machine. It’s how you move your fabric through the machine as you’re stitching.

Most of the time when I’m filling a space, I stitch a zigzag line at an angle around the edge, I shade the piece by stitching from side to side, and then I smooth the edges with a zigzag that moves straight through.

But when you just move from side to side you get a long blending stitch that flows into itself. The breast of the bird is done from side to side. The feathers are done with an outline, shading, and smoothing. You can see the difference.

You can find more information about the angle of stitching in the Thread Magic Stitch Vocabulary Book or this post, Stitch Vocabulary: Zigzag Stitch.

Living Large: Strategies for Dealing with Large Quilts

| ellenanneeddy

I almost never do bed quilts. I did them when I was younger and watched them die as I used them. It was too depressing. I occasionally will do a baby quilt or a comfort quilt for someone dealing with illness. Mostly I do art.

And since art doesn’t have to be big, I don’t often make something bed-size to put on the wall. Except when I do,

This heron couldn’t be done smaller. At least I couldn’t do it smaller. He’s 60″ x 52″. He’s pretty much the size of God’s underpants.

There are some strategies for dealing with overlarge quilts. The first three are, don’t. But if you’ve decided it must be large, there are several things you can do that will help.

Strategies for Large Quilts

Break it into components. For myself, that means the embroideries. I do them separately and then apply them when the top is ready. But it might be working in rows or in segments. Different quilts will suggest different approaches.

Use larger details. Scaling up the design means there’s less work in it. Sometimes extensive detail just looks ditsy on a larger piece.

Buy extra sewing machine needles. Larger quilts require more tugging and pulling and that will break needles. Promise.

If you have a machine with a wider arm, this is the moment. The arm of your machine is the space between the needle and the mechanical right end. A lot of manufacturers make machines with a longer arm. That’s extra room to shove the quilt through the machine. It can be very helpful.

Use a design wall where you can walk away and really see your design. A design wall should be big enough to accommodate your work and in a big enough space where you can walk away and really look at it. For more information about making and using a design wall, here’s a blog post on it: Studio Essentials: The Glories of the Design Wall.

The other helper is what we used to call bicycle clamps. Roll your quilt, clamp them with these clamps and then you can maneuver it easier.

I don’t do large quilts often. But they do really make a punchline in a gallery show. So this heron is promised to a show at the Peoria Art Guild in September. We should have him crowing by then.

”

Breaking Through Borders: Establishing Movement through Frames

| ellenanneeddy

Being someone who does nature quilts, it seems unnatural to frame a background with a border. Nature doesn’t fit into a picture frame very well. Of course, there are times when you simply have to. You have a 50″ subject that needs a background and 45″ fabric just won’t stretch far enough to accommodate.

But there are other reasons to create a border.A border can emphasize a light source in the center. A border can bind your subject into the frame of the piece, capturing it almost. Breaking through that border establishes the idea that your subject can’t be contained. That it’s moving so hard and so fast you can’t keep it in a box.

This heron just turned out to be too big for any of the fabric I had. I considered splitting a light source, but the background was just too good to cut up. So instead, I bordered it.

Borders are basically a frame. And like other frames they either offer something special or they really detract. You can use a border to create a different atmosphere, to give a boundary, or to simply expand the fabric. In this case, I needed the fabric extended, but I didn’t want to make it a square box for my subject.

Unbordered, Equal Borders, Gradated Borders

These rectangles show three options: an unbordered piece, a piece with equal borders, and a piece with gradated sizes. Equal borders make a plain frame for the subject. But a gradated border gives weight to the bottom, gives a travel direction to the eye, and starts the movement of the piece before the subject is even applied.

I cut my outside strips at 5″, 6″, 7″ and 8. Narrowest on the top. Widest on the bottom. The green inner border is almost the same value (black/white) as the purple so it doesn’t make as hard a border statement.

The head of the bird is in the lightest (narrowest) spot and his feet are where the sun don’t shine.

The frame also creates a light source in the center, illuminating the bird.

Using a border, not only to make more space, but to define light and direction is an easy way to make a frame. And pulling your imagery out side the box breaks the border in a way that makes the whole piece move. What could be easier?

IRidescent by Accident

| ellenanneeddy

Nothing is quite as daunting as a really large embroidery. This babe is almost as tall as I am (4′ 10″). I haven’t measured him yet, but he doesn’t fit on a yard of fabric and we’ll have to sort that out soon.

Part of what is daunting is seeing the whole on a piece like this. Part of it is that when things go through that awkward half-embroidered stage, they look really weird for quite some time while you’re finishing off.

I’ve always made a point of showing you all of my errors. Partially because I view that kind of honesty as helpful and partially because I don’t necessarily view them as errors. They are the path through that particular piece of art. Sometimes they even turn out to be helpful.

I finished binding one quilt in a bright green in the middle of working on this quilt. Went back the next morning, and finished a large swath of feathers, only to find they were that very bright green. I was appalled. I picked up the mustache trimmer, looked at the immense patch of green, and quailed.

Then I thought for a while. Part of the problem with herons is that they are mostly grey and dark blue. With bits of rust. They are exquisitely formed but the color scheme leaves much to be desired.

But what is grey? Any color can be made into grey either by adding a lot of white or a lot of black. It’s a matter of value.

So I gathered up all the colors I had that were the same values, not colors. I added a lot of rust that gives it a warmer color, which means I’ll need a background with warmer shades as well.

All those colors sort of made it rainbow-colored. And rainbow colors make iridescence. But since they’re the same values, it’s still greyish. I think it’s going to be all right. I’ll know in several days when it’s all stitched in.

A word about the photography. I just got a new to me iPhone 12 mini. I do think the pictures are an improvement. Let me know what you think.

If you’d like more information about ripping with a mustache trimmer, see the blog To Rip or Not to Rip.

Back to the Drawing Board: Drawing to Make Creatures Feel Live

| ellenanneeddy
1017 Three Wishes

Embroidered appliques rely on a drawing to start with. It’s always a moment when I take a deep breath and give it my best shot. I’m not good at drawing. I’m just stubborn enough to keep at it until I have something useful that I’m usually aiming for is a creature in motion. I hate still lifes because the last thing they seem to be is living. If it’s in motion, it’s live.

In a way this is another reason for free motion. The perfection you find in computerized embroidery doesn’t help us here. Being less regular, smooth and even make things more real and interesting.

I usually draw on Totally Stable, which is a fairly good thin drawing surface that irons on and tears away from the final embroidery surface. It does not erase well, but I usually trace my first drawing to clean it up and to get it going in the right direction. Since the drawing is my pattern on the back, it needs to be facing the opposite direction for the applique. I do make some adjustments for shrinkage. Check out my post Drawing on Distortion for a discussion on how to plan for that.

Is it moving already?

Of course we are talking about a two dimensional art form. How do you make it move? There are several good tricks.

If it’s walking, flying, crawling or stepping up, you’re already half way there.

Don’t make things symmetrical

If things are in dimension, one side is always a bit smaller than the other. Of course it helps if one side is moving differently than the other. But the closer side will have a bigger eye, hand, wing, claw or whatever. That’s how we’d perceive it in life.

Depend on angles

. Things either drawn with an angle or put on an angle give the illusion of motion because our mind tells us they are in motion. We expect gravity to be in play when we see something at an angle. It’s moving because in real life it would be moving.

The best reference book I know for this is The Illusion of Life: Disney Animation. I’m not a big Disney fan, but Disney knows about creating images that flow and move from one frame to another. It’s not a cheap book but it’s one of the best.

So I draw things. And redraw them. And scratch out the lines I don’t like. And trace it once or twice. Until I have something that moves me and moves.

I’ll Be Feathered: Creating Feathers in Thread

| ellenanneeddy
Green heron

Feathers are perfect subjects for thread. Birds too, but there are many kinds of feathers, defined as always by the angle of the zigzag stitch.

I’ve been working on two birds this couple of weeks: a green heron and a goldfinch.

Goldfinch

It starts with a drawing. This is a drawing on Totally Stable. It goes on the back of the sandwich so it’s my pattern.

The head and underbody of the bid are soft overall feathers. These can be made with a back and forth zigzag stitch done side to side. Layer after layer of thread blends the colors.

Underbelly and leg
Head
top section of wings

The upper part of the wing follows the arc of the feather, shaded with the side to side zigzag The feathers are lined with gold and soft yellow to define them.

Pinions

The pinion feather stitching is made with angled stitches down the feather with a curved arc at the end.

The streak

These feathers have a streak of yellow defining the quill.

Quills do

All in all the stitching separates the kinds of feathers. And creates a bird made strictly of thread and stitchery.