Hand dyed cheesecloth

Separation Anxiety: Making Mountains Out of Zigzag

| ellenanneeddy

The hardest technical thing to deal with in free motion embroidery is the distortion. Any time you stitch rhythmically and close together, the fabric will distort, trying to make room for the extra thread in it. More so if you’re using a zigzag stitch. Zigzag stitching pulls on both sides and can make a top wave like a flag.

There are several easy cures: Using a stabilizer, using a hoop, using smaller width stitches. All that being done you can still end up with a crumpled mess lying like a hat. It’s not a happy moment. It’s made worse by the fact that the fabric made by that kind of stitching is usually pretty fabulous. Just lumpy.

Can you steam it? You can try. Sometimes it helps. Can you cut it apart and put it back together? I’ve done it. It’s a last resort, but it’s better than lying in lumps.

Or you can cure it by cutting off the rumple. I’ve done that a lot with embroidered subjects. But can you do that with elements of the background? Why not!

Cheesecloth mountains

This is a direct applique technique. I have some cheesecloth mountains for this owl in the meadow. If I stitch them down on the quilt surface I will end up waving the flag. So instead, I’m going to glue them on felt and do my detail stitching before we attach it to the front.

Do I lose something by this? Several things. I lose the look of the hand dye behind the cheesecloth, which I like quite a bit. And I lose the distortion. I hate the distortion. Do the math and make your choice.

The felt I’m using is a cheap acrylic felt from Joann’s. It’s stable, doesn’t fray, and stitches well. I’m making my mountains out of cheesecloth and Steam a Seam 2. On the back, I have a layer of Stitch and Tear stabilizer to help control the distortion and give support to the stitching.

Cheesecloth is porous. The glue will come through when you iron it. I’m using a Teflon pressing cloth to protect my iron.

The glue will come through onto my pressing cloth. I can clean that off with a Scotch Brite No Stick Scrubby.

Once I’ve got it glued down and stabilized, I can start stitching.

The stitching on these is moved through the machine from side to side. That creates a long stitch that fills the mountains quite nicely. It also distorts the fabric a lot. You can see the pull of the stitch on the fabric as the stitching fills.

When it’s all cut away the distortion is gone and all is left is a thin margin of felt that can be covered with minimal zigzag stitching. All those textured mountains with two small rows of zigzag that should not distort much.

I’ll pull off the last of the glue before I apply the mountains to the piece. I use a small square of plain cotton (something I never want to see again) as a pressing cloth and iron the embroideries on high heat. The glue will bubble through to the pressing cloth and pull right off. Make sure you remove the pressing cloth while it’s all steamy hot. Throw the cotton pressing cloth away. It will transfer that other bit of glue on to another piece if you reuse it.

This is a hard edge applique technique, because when I stitch it down, the stitching will be a visible line of polyester zigzag stitching.

everything but the owl

Now all I need to do is stitch down the flowers, add the owl and stipple.

For more information about cheesecloth check out: The Miracle of Cheesecloth: It’s not Just for Turkey Anymore and

For more information about zigzag stitching: All About the Line: Choosing the Right Stitch

Over and under: three dimensional leaves

| ellenanneeddy
The leaf is all one piece of fabric. The threadwork defines the fold.

If you’re making nature quilts, you’re likely to need to answer the leaf question. Leaves ripple and rumple and almost never lie flat. And they fold. How do we make that happen on the quilt surface?

Here some approaches.

defined by stitch

I tend to use a free motion zigzag stitch mostly to apply leaves. It’s fluid. It follows curves. And I can change color at will. I also tend to use a polyester Neon embroidery thread by Madeira. It’s strong, bright as a button and light enough to stitch over several times until I get what I want.

Dividing a leaf in half and coloring it with one side dark and the other light creates an immediate sense of dimension for this quilt. It’s the same fabric, but the coloration changes with the thread choices.

defined by applique method

Direct applique is applied right to the top of the piece with glue. I use Steam-A-Seam 2 by preference because it allows me to move the piece around before I iron it into a permanent place.

This makes simple shapes easily. But it doesn’t allow for wild curves and vines

The leaves are drawn on a separate fabric and stitched to the top. Then the access is all trimmed away.

cutaway leaves

Cut-away applique is done with a cloth laid over the top and stitched in the shape you want. Then the leaves, vines and trees can be cut away along the stitch line, leaving more fluid shapes.

Leaves formed by cut-away applique continue the background shading through peek-a-boo holes.

Cheesecloth leaves

The sheer qualities of cheesecloth and the texture mimics the cell structure of the leaves and lets bits of the background through. Cheesecloth makes fabulous leaves and can be dyed any color with Procion dyes. The wild stitching with lime and orange makes them look crinkled.

Making the leaf fold

This cheesecloth leaf folds along the darker blue line of thread. The threadwork itself defines the fold. The purple line on these leaves folds the center and the two slightly different thread colors top and bottom help confirm that.

Mostly leaves are defined by threadwork. These are some ways to make leaves look like they popped out of the background. And that’s pretty much what you want.