Fiber Art

Seeing Right Through: Applique with Sheers

| ellenanneeddy
Splash! in process

I know it’s not supposed to be quilter’s fabric. Sorry. I can’t leave it alone. It’s too much fun to play with test tube babies. Over the years I’ve collected a special stash of laces, organzas, chiffons, brocades and just plain weird stuff.

It’s not anything I would piece. But no one would call me a piecer so that’s moot. But it’s wonderful for the things in this world that are, by nature transparent and/or translucent. I’ve talked earlier about finishing sheer edges with a soft edge finish, Sun Rocks, Wind, Water: Elements with Soft Edges.

But there are times you want that edge to show. Edging lace and sheer applique is a way of not only defining the edge of the applique but of controlling the color and controlling exactly how transparent it is.

I’m working on some moonflowers and some snow drops for a quilt called Splash. The quilt features a dark mostly blue background, and I wanted glowing white flowers for the background. Moonflowers are morning glories that bloom only at night. They’re perfect.

It’s also a way of lightening a darker quilt.

I used both lace and organza for my flowers. I do like them to have small differences, so they have their own individuality. Then I placed them with Steam a Seam 2 on a piece of white felt, with some green leaves. Why felt? It’s a spectacular stabilizer, with a layer of Stitch and Tear underneath. Why white? Because it’s all going to show. Whatever color felt I put under the lace will show through and define the color of the finished flowers. Organza will show through the most, lace less so, and Angelina fiber the least.

Knowing that is power. Felt comes in a full Crayola box of colors and it allows me an extra layer of shading in the process. The thread I use will also define the colors and shade things into darks and lights. Here’s a collection of flowers with different backing felt colors.

white over pail blue
angelina fiber
white over pale blue
white over pink
white over white
White on White
white over turquoise

I use a number of pastels as well as different whites to stitch the edges to give depth. As usual, it’s darker where the sun isn’t shining.

shading the flower

I stitched the flowers with a free motion zigzag. Here’s a little video showing how that works.

I did these moonflowers separately from the piece because they’re relatively large and would have distorted the surface. But for the smaller snowdrops, I applied them directly with Steam a Seam ad then stitched on them directly. The cool thing about this is that the background peeks through, like all translucent flowers. It’s a cool effect.

snowdrops directly on the fabric

And it’s a great reason to play with sparkle lace. There should always be a reason for sparkle lace!

Thermal Shock: Shocking Color Choices

| ellenanneeddy

One of the hardest things in embroidery work is to get over the match instinct. After years of perfectly matching thread to my project, I’ve had to learn to pick out the highest contrast threads to make an image that really shows up.

In embroidery, contrast is everything. If it all mushes together color-wise then you have a very mushy image indeed. Smooth color exchanges that are analogous and sit next to each other on the color wheel are pretty. But they don’t have much punch. So what you want is color that builds not on similarities but on differences. There are several kind of contrast: color, tone, clarity, and temperature.

Today we’re talking about color ,which is simply the hue. Is it red, blue, or yellow? Or an odd shade of green? It’s not a simple as it looks. There a million reds, blues and yellows and they are not the same.

Thermal shock is about the temperature of a color. Every color, no matter whether it is a cool or warm color, leans either towards having a cool or warm cast. It doesn’t matter if it’s a cool color or a warm color. There are cool yellows, there are hot blues. If all the colors are either cool or warm they’ll flow into each other like analogous colors. But if they’re not? You get thermal shock. Like standing in a cold water sprinkler on a steaming hot day. The effect is kind of visually electric.

Blue and Yellow Don’t Make Green is an excellent book discussing thermal variations and how that creates differing colors.

I wanted this fish to jump off the surface and I’d decided on yellow, to give it some definition from the floral like background. But I wanted it showy. So the colors I picked, cool orange, cool and warm yellows, cool and warm blues left it shimmery and gave it impact.



Of course it helps if you have shocking thread to begin with. This particular florescent is a Madeira polyester 40# called Poly Neon. Neon has a around 800 colors of every hue, but it has a select section that really is neon. I went through my collection of those threads and chose my shockers.

fish scales
Face
Tail

Each scale on this fish has a blue outer ridge, a purple, and 2 yellows. It’s been shaded in gradations to create the underside separately from the top.

The face and tail are a looser gradation that just shades from darkest/brightest to softer shades.

Here’s a video showing how that’s stitched.

I’ve written a lot about color because it matters to me. Building color in threadwork is done shade by shade, one color on top of another. The eye mixes those colors, which keeps them clear and crisp. But when the colors are fire and ice, prepare to be shocked!

Other blogs discussing color

Lighting the Spark

One Thousand Crayons

Why is that Fish Glowing?

Canva has an excellent page on color theory.

You’ll find Blue and Yellow Don’t Make Green on Amazon.

Polyneon Threads are available at Madeira USA

Hard Edge Applique: Redefining the Line

| ellenanneeddy

We talked earlier about soft edge applique. Soft edge is a minimal treatment that simply covers the edge of an applique with monofilament nylon or poly thread with a zigzag stitch. For things like water, air, fire, rocks, mist, suns and moons it’s perfect. Sometimes it’s good for flower petals as well. It’s for anything that doesn’t need a hard defining edge. It creates soft color shifts across the quilt.

But some things need that edge. Bugs, birds, frogs and fish all need that hard definition. Or you can’t really see them at a distance. And it makes a huge difference when you go to photo your piece.

You know I’m a color girl. I’m going to want to use color every time I can. But over the years I have learned, if you want it to stand out, use the black for an outline.

green outline
black outline

I particularly have tried it with bugs. Metallic thread green thread always gets my attention, and I reach for it much in the way you might reach for cherry cordial chocolates. But I’m mildly disappointed with it in the end, because it never gives as defined a space.

basic outline

I’ve been working on this egret, and the my process shots reminded me how important that outline is. Again, I’ve been working on doing a dimensional white bird, so it has a lot of contrast underneath to shade to white on the top.

The bare bones outline define the areas to shade with color. I’ve come to rely on 40 weight Madeira Poly neon. It comes in several blacks, but the definitive one is color #1800. I’m using a free motion zigzag stitch to outline, which is why the width is variable. (See post Zigging Upended for a tutorial on zigzag stitch).

I build color, from dark to light from the outline. For more information about choosing those colors, check out this post: Into White: The Search for White Thread Painting. But it’s coloring within the lines. As you can guess, I’m not so good at that. The threads encroach over the line and things get mushy. So the final act is that reoutline.

Redefining the outline

You can see the difference that second outline makes. All the edges that are fuzzed and mussy are now tightened up and out there.

The outside edges will be defined as I stitch the bird down. But having the inner edges cleaned with an extra edge of stitchery redefines all the lines.

finished egret

When I applique the bird on, again I’ll use my zigzag stitch with black thread. It gives the outline definition and punch and helps separate the bird from the background.

Studio Essentials: The Glory of the Design Board

| ellenanneeddy
1023-22 White Cherry Pond

Years ago I was in an Amish shop, where I made a purchase I really probably only could have made there. I bought 6 yards of black polyester double knit. The poor lady was scandalized. I was dressed in hand dye, obviously not only English but art quilting English. The Amish keep black polyester double knit for men’s suits. Clearly I was not making suits for some nice Amish man.

But it’s the perfect cover for a design board.

I have in the past hung things up on a balcony to the back porch and walked down the alley until I could see it right. That’s a bit hard on a daily basis, and I no longer have a balcony.

Do you need a design board? Yes. Yes you do. You need to really see what you’re piece is doing.

I have a lot of tools in my studio. I love my machines, my irons, my cutting and ironing table. But queen of them all is my design board.

I no longer work in bed quilt sizes. It’s irrelevant to art quilting. But most significant show quilts are largish. Average size for my work is about 36″ x 45″. It’s hard to find a flat surface that size that has nothing on it. Certainly not the floor. Never mind the other things that already on the floor.

The cutting table accommodates that size, but looking at something on a flat surface gives a distorted view. The only way you can really see your quilt is to hang it up.

Different placements for the bird on my photo wall

There’s a rhythm to doing any kind of art, and once you start working makes you want to push through. It feels good to do that. But it’s a trap. If you don’t look at what you’re doing, it’s easy to do something you wish you hadn’t. Does it need to move over an inch? Is the drawing the way I want it? Are the colors working? If you can’t see it, you can’t evaluate what you’ve done. I can’t really see it on the table., either. The perspective is off when you see it lying flat. So up it goes on the wall. It’s worth leaving it there a day or two if you think something’s not right. You can’t see what’s wrong if you don’t look at it.

My wall a sheet of 4″ thick sheet of blue dow insulation snugged up against the longest wall in the sewing room. And it’s covered with that black double knit.

Blue Dow is available at most building stores like Loews and Menards. It comes 4′ by 8′. It is lightweight and you can pin projects up easily. It can be cut to shape with a bread knife.

Any large piece of fabric like a sheet, felt, or double knit can be used for a backdrop. Black, grey or white make good backgrounds. I like double knit because it doesn’t collect lint and the black is a nice dark black.

It’s also my photo wall. Having a photo wall and set up in your studio gives you consistent photos. If you have the same camera, the same lights and the same background, your photos fit better in with each other and are easier to adjust, since you know what to do for them.

I also usually take a picture of the days work as the last thing I do, so I can evaluate my next step. Usually I post it on Facebook if it’s interesting, but at least for myself, I can see what’s going on. And plan what to do next.

For more information about how to evaluate your piece and it’s progress check out The Importance of Backing Up and The Wrong Bird: The Importance of Not Settling.

For information about photo walls and lights, see Fiat Lux: Studio Illumination

Separation Anxiety: Making Mountains Out of Zigzag

| ellenanneeddy

The hardest technical thing to deal with in free motion embroidery is the distortion. Any time you stitch rhythmically and close together, the fabric will distort, trying to make room for the extra thread in it. More so if you’re using a zigzag stitch. Zigzag stitching pulls on both sides and can make a top wave like a flag.

There are several easy cures: Using a stabilizer, using a hoop, using smaller width stitches. All that being done you can still end up with a crumpled mess lying like a hat. It’s not a happy moment. It’s made worse by the fact that the fabric made by that kind of stitching is usually pretty fabulous. Just lumpy.

Can you steam it? You can try. Sometimes it helps. Can you cut it apart and put it back together? I’ve done it. It’s a last resort, but it’s better than lying in lumps.

Or you can cure it by cutting off the rumple. I’ve done that a lot with embroidered subjects. But can you do that with elements of the background? Why not!

Cheesecloth mountains

This is a direct applique technique. I have some cheesecloth mountains for this owl in the meadow. If I stitch them down on the quilt surface I will end up waving the flag. So instead, I’m going to glue them on felt and do my detail stitching before we attach it to the front.

Do I lose something by this? Several things. I lose the look of the hand dye behind the cheesecloth, which I like quite a bit. And I lose the distortion. I hate the distortion. Do the math and make your choice.

The felt I’m using is a cheap acrylic felt from Joann’s. It’s stable, doesn’t fray, and stitches well. I’m making my mountains out of cheesecloth and Steam a Seam 2. On the back, I have a layer of Stitch and Tear stabilizer to help control the distortion and give support to the stitching.

Cheesecloth is porous. The glue will come through when you iron it. I’m using a Teflon pressing cloth to protect my iron.

The glue will come through onto my pressing cloth. I can clean that off with a Scotch Brite No Stick Scrubby.

Once I’ve got it glued down and stabilized, I can start stitching.

The stitching on these is moved through the machine from side to side. That creates a long stitch that fills the mountains quite nicely. It also distorts the fabric a lot. You can see the pull of the stitch on the fabric as the stitching fills.

When it’s all cut away the distortion is gone and all is left is a thin margin of felt that can be covered with minimal zigzag stitching. All those textured mountains with two small rows of zigzag that should not distort much.

I’ll pull off the last of the glue before I apply the mountains to the piece. I use a small square of plain cotton (something I never want to see again) as a pressing cloth and iron the embroideries on high heat. The glue will bubble through to the pressing cloth and pull right off. Make sure you remove the pressing cloth while it’s all steamy hot. Throw the cotton pressing cloth away. It will transfer that other bit of glue on to another piece if you reuse it.

This is a hard edge applique technique, because when I stitch it down, the stitching will be a visible line of polyester zigzag stitching.

everything but the owl

Now all I need to do is stitch down the flowers, add the owl and stipple.

For more information about cheesecloth check out: The Miracle of Cheesecloth: It’s not Just for Turkey Anymore and

For more information about zigzag stitching: All About the Line: Choosing the Right Stitch

Sun, clouds, Water and Rocks: Making elements with Soft edged Appliqué

| ellenanneeddy

When we applique something, we think most about the fabrics used together and how they interact. But the way it’s appliqued, the stitch and threads used make just as big an impact. I’m going to talk for a couple of weeks about applique edges, and how those change the look of our work.

Steam A Seam 2

Soft edge applique is for things that don’t have single color edges. Bubbles. Clouds. Water. Mist. Angelina fiber. Sunlight. And rocks. Why? A hard line of stitching makes them stand out too strongly and makes an ugly line. So all I want to see is the change in fabric. Particularly with sheers and laces. It’s a direct applique technique because it’s glued and stitched directly to the top.

I do most of my applique with Steam A Seam 2. It’s a peanut butter sandwich with two pieces of paper and tacky glue in the center. I can peel off one side of the paper, tack it to my fabric, peel off the other side and then place it on your piece over and over again until I’m happy with the result and I iron it down.

I usually cut c and s shapes. These flow into each other, and they make all kinds of natural light and shadow. You can cut pieces one after another following a similar shape.

Here’s a sun and some clouds. Same shapes basically, but they fill in well. The nice thing about Steam A Seam 2 is that it sticks, but you can reposition it. I’ll put pieces up on my design wall and then play with them until they’re right.

several placements for the sun and clouds

I never really trust glue. Sorry. I just don’t. I’ve seen it too often. You iron it down and it peels back off. Maybe I don’t always iron long enough. But I always stitch it down, just in case. Then I know it’s not going to travel anywhere.

Soft edge applique is done with invisible thread in the top and an unobtrusive color thread in the bobbin. I use a zigzag free motion stitch, at an angle. That gives me the most amount of edge coverage.

I use an invisible thread. But which one? It seems to depend on you and your machine. I’ve had some good luck with YLI Wonder thread, but I need to take my machine speed down to a crawl to use it on the 770 Bernina. Madeira, Superior, and Gutermann have different grades of monofilament nylon and poly that you can try. If one doesn’t work, try another. I use a topstitching #90 needle, and Sewer’s Aid (a thread lubricant). Will it break? Yes, I can promise you that. But it leaves a soft edge to the piece that makes water and clouds look more real. If the breakage is making me crazy, I sew as slowly as your machine can.

Angled free motion zigzag stitch

Free motion zigzag stitching depends on the angle your fabric takes through the machine. The body shading angle is the one that will give you the most coverage, but the angle will change as you go around the piece. All you want to do is lightly zigzag over the edges.

Water, Land, Sky

It works for rocks too. Rocks aren’t soft, but their edges are never one solid color. So just having a soft edge where you see the hand dye makes a much better rock.

And the best part? I can add a whole other layer of water lace to put my frog in the water. How good is that?

Soft edge applique is perfect for natural elements. Next week we’ll talk about hard edge applique.

Getting fabric Straight: The wonders of starch

| ellenanneeddy

One of the constants of quilting is that the methods of fabric care we enjoy now don’t always work for quilting fabric. Why? Quilts are mostly cotton. Cotton is not perma-press. It can be made so, but it’s hardly cotton after that. It dries at a different temperature, it shrinks, it is more vulnerable to mildew. It does not act like a polyester fabric. And it never will. It’s cotton. It’s a natural fiber that does not ever act like a test tube baby. And it rumples. There are no wrinkles like cotton wrinkles.

So, many of the tools our grandmother’s used to work with cotton still work best. I have a wringer washer and mangle for dyeing fabric. They both are made pretty specifically for cotton and still do the job they were made for.

We talked several weeks ago about cotton and irons. Cotton takes real heat. The old fashioned irons do that.

Here’s the other unspoken bit about cotton. It’s made of fibers that move, shift and don’t stay steady. You can tear fabric straight on the edge and have it still not lie square. There is, however, a secret weapon. Starch.

You know that wonderful crisp feeling that your cotton has off the bolt, when it feels like a thin piece of paper, only fluid. That’s created by starch. Starch is one of several chemicals they use to finish fabric. So is formaldehyde. If you’ve ever walked into a fabric store and smelled a strong chemical smell, that’s probably it. A good prewash removes much of that smell. But it also removes the starch.

We joke about starch in someone’s underwear and complain of too much starch in new clothes, but for quilting, it really helps us out. It means things are more stable and don’t move around. Those moving, shifting, shifty fabrics stay flat and stay straight, making it easier to piece straight seams. I’m told it’s excellent for hand piecing. It keeps the fabric smooth and steady underneath the needle.

I became aware of the starch factor when I began to dye all my fabric. It just didn’t have the same body as unwashed fabric. I experimented with spray starch and found it expensive but helpful. It was also very hard to control how much starch you got. And you often got spots.

Then I found liquid starch. Stay Flo has turned out to be the best I’ve used. It comes in a jug and you mix it to the level you want. I usually use 1/3 cup of Stay Flow to 2/3 cup of water. Roughly. I mix that in a cheap spray bottle.

But here’s the secret weapon. On my last wash out, I put in a cupful of starch in the softener cup of my washer. I also put in a capful of a professional softer called ProSoft or Milsoft. On it’s final rinse, it starches all my fabric evenly. Then I let it hang dry and iron it while damp. Perfection.

Here’s an interesting article from The Spruce with more technical information about sizing and starches.

Starched fabric is so much easier to piece because it doesn’t shift as much.

I’ve been piecing another landscape gradation, and I gave it a final starch before pressing it. It changes how your fabric lies, how it irons, and how it handles under the needle. And you don’t need to stop and smell the formaldehyde. How good is that?

Over and under: three dimensional leaves

| ellenanneeddy
The leaf is all one piece of fabric. The threadwork defines the fold.

If you’re making nature quilts, you’re likely to need to answer the leaf question. Leaves ripple and rumple and almost never lie flat. And they fold. How do we make that happen on the quilt surface?

Here some approaches.

defined by stitch

I tend to use a free motion zigzag stitch mostly to apply leaves. It’s fluid. It follows curves. And I can change color at will. I also tend to use a polyester Neon embroidery thread by Madeira. It’s strong, bright as a button and light enough to stitch over several times until I get what I want.

Dividing a leaf in half and coloring it with one side dark and the other light creates an immediate sense of dimension for this quilt. It’s the same fabric, but the coloration changes with the thread choices.

defined by applique method

Direct applique is applied right to the top of the piece with glue. I use Steam-A-Seam 2 by preference because it allows me to move the piece around before I iron it into a permanent place.

This makes simple shapes easily. But it doesn’t allow for wild curves and vines

The leaves are drawn on a separate fabric and stitched to the top. Then the access is all trimmed away.

cutaway leaves

Cut-away applique is done with a cloth laid over the top and stitched in the shape you want. Then the leaves, vines and trees can be cut away along the stitch line, leaving more fluid shapes.

Leaves formed by cut-away applique continue the background shading through peek-a-boo holes.

Cheesecloth leaves

The sheer qualities of cheesecloth and the texture mimics the cell structure of the leaves and lets bits of the background through. Cheesecloth makes fabulous leaves and can be dyed any color with Procion dyes. The wild stitching with lime and orange makes them look crinkled.

Making the leaf fold

This cheesecloth leaf folds along the darker blue line of thread. The threadwork itself defines the fold. The purple line on these leaves folds the center and the two slightly different thread colors top and bottom help confirm that.

Mostly leaves are defined by threadwork. These are some ways to make leaves look like they popped out of the background. And that’s pretty much what you want.

Lighting the Spark: creating thread images with contrast

| ellenanneeddy

Threadwork is delicate. Just because threads are tiny thin things. Just by their nature.

We can layer threads infinitely. But singularly they don’t have a lot of effect. So how do we keep threadwork from mushing into a soft blend? We need a spark. If we take just light and dark shades of a color, that’s a good start. But it’s bland.

What makes a spark? Contrast. Either in color, in shine or in temperature. High contrast keeps it from being dull. And since thread is such a little thing, it we can use intense contrast without overwhelming the piece.

sheen

The first thing we see with thread is it’s sheen. How shiny is it? Threads come from dull cottons, to smooth rayons and polys to sparkly metallics. The eye sees the sparkle first.

So if we want something to stand out, something really shiny will make the spark. Which is why I use Sliver, and a number of other flat shiny threads.

If you’re doing animals, you want their eyes to be the thing you see first. Sliver does that. You make an iris of any color, a black pupil, and a small iridescent spark inside the eye. It’s a spark inside a spark. And it brings an eye to life.

Or I can make my background shimmer by stippling sliver in gradated colors across the piece. Sliver is a delicate thread. It works best in a regular bobbin case. I use a matching polyester thread on top. If I stipple pretty much last, all the other stitching tells me where the stippling should be.

color

Color contrast always startles the eye. The highest contrast in color is always going to be the complement. Complements are powerful. The blue and peach make a spark between them to shade this bird.

The pinks are sparked by the yellow green overstitching that makes the feathers an flowers.

temperature

The hot gold details stand out against the smooth greens and blues and lights up the feathers.

black and white: Contrast in Value

Both black and white are extreme contrast. For threadwork, I’m careful of both of them. But they give us an edge. I almost always outline in solid black or black metallic. But on the raven’s wings, I overstitched the feathers with black to make them pop.

Contrast is always what makes our heads turn, our eyes turn, our hearts beat. And that’s the point to art, isn’t it?