Bobbin Management: When the Dead Dead Bobbin Goes Bob bob Bobbing Along

For those of us who use bobbin work, there is always the quest for empty bobbins. For every color of thread I use, I need a bobbin with that color of thread.

So it’s no surprise when I get a new kind of machine, I usually buy 200 new bobbins for the machine.

Unfortunately, bobbins cost more. My Bernina 770 uses a $5 bobbin. They are pricy. But truly, like being too rich or too thin, there are never enough.

Thread is pricey too. It won’t go back on the spool. So you either use it up or pull it off the bobbin and waste it.

So when I went to do a run of minnows, I looked at my bobbin box and made a plan.

I didn’t want the fish to be in any way identical. That’s not the nature of nature. Nature is endlessly variable. So I decided on green fish and yellow fish, and planned to empty each yellow or green bobbin dark to light, top to bottom.

The fish I’d drawn had cross hatched details. I lined up my bobbin colors and made a progression of colors square by square, dark to light. I think I filled 4 bobbins for the whole batch. How many did I empty? The empty bobbin count at the end was 16.

Here’s the finished fish. Because I wasn’t micromanaging the colors, they clash a little and contrast not only in color but in tempurature. Which makes them shimmer a bit. Like fish.

My dad would have been pleased to make that catch. And I have enough empty bobbins to tackle the birds next.

Rethinking Rocks

Just like I’m not a desert girl, I’m not a rock girl either. I don’t think in terms of dry. As an artist it’s always good to stretch past what you know how to do.

The post, Good Bones:Rocks from Water, covers how I’ve usually done rocks.

For the longest time, I’ve cut rocks out of hand dye, and been satisfied with them. But I really wanted to do a waterfall with carp. And you can’t have a waterfall without somewhere from the water to fall from. That would be rocks.

I put up some cut grey and brown rocks and looked at them. They looked hopelessly childish and wrong.

It’s a bad moment. It’s also a great invitation. You dig deep, you look at it in different ways, and try to morph what you already know into what you need to do next.

That sent me spinning off to my library to look at how other people handle rocks. I have a book of Elizabeth Doolittle that’s full of great mountain imagery. And a great book on Glacier National Park with some fabulous waterfalls.

The real treasure was my Mustard Seed Garden Manual of Painting, the classic sumi painting text. It said that trees were all about the veins in the leaves, but that rocks were about the grain in the rocks.

I thought about that for a while. Then I realized, the occlusions in the hand dye are the grains in the rock.

I replanned the rocks for the waterfall. Instead of making strips of rocks, I cut chunks. I filled in areas with smaller rocks and gravel.

Then I texturized the rocks, putting on a dark under edge and shading at the bottom third, and followed the patterns of the hand dye as grain. I used black thread and a zigzag stitch to establish the bottom of the rock and then shaded with a long-short stitch. Finally I followed the grain of the rock using the elements of the hand dye. Since I did a lot of stitching, I made them separate from the piece on stitch and tear and felt as stabilizers.

I’m still unsure. But I’m closer. I need to make the rocks that define the pond underneath and sort out the waterfall, but I think it’s on its way.

These rocks need to be less regular. I tried to use perspective to determine the shading, but simple shading seemed to work better.

It’s a slower process. I’m stymied on the desert quilt while I’m waiting for the books I ordered to figure out sand textures. It’s not just sewing, it’s thinking.

What do you think? Are these rocks over-fussy, or do they add the right amount of texture.?

Next week, adding the waterfalls and koi.

Where Does the Art Come From: Feeding Your Eye

Books currently on the desk

This has been a counter-productive week. My leg went out ( still not sure why), and I’ve had some low-grade flu. So my studio work didn’t happen. Instead, I worked a bit in my library.

When I married Don and moved, I stripped my library down. I have several libraries. One is for personal information and entertainment. Small kitchen library. And a pile of art books. Somehow that has continued to grow.

Where does our art come from? We’d like everything to be completely out of ourselves. I’m not sure that’s possible.

We have several illusions about art. We’d like to believe all art is original. But it’s not. Art comes from our response to other images. All art is in some way derivative. Different pieces of art hold a conversation over time. Art changes how other art is made.

We are told only artists are artists. That’s just wrong. Art is not unique to artists. It’s a part of our genome. It’s the ability to view our world differently. In our view of the world, we begin to change our world. when we work with those images, we change ourselves, and that changes the world. Just a little bit. It’s the creation of sense, beauty, and order. We have to silence the voice that says we are not artists. Because it’s the voice that tells us we can’t. Because it strips us of power that has always been our own.

So how do we kick start art? We need to feed our eyes and refuse to hamstring ourselves. What our senses bring gives us all kinds of inspiration.

But back to art being derivative: We work with the images that set us on fire, move our inners, pop out our own eyes or perhaps someone else’s. And there is never any reference like a book. The zoo is closed. The science program moves too fast. The web pictures are tiny. Your own library is a wide world portal that never closes; Not even at three am.

So I look for books with enough animal pictures to know how many toes a frog has and what angle the leg is at. I look for landscape books, garden books. pet books, pictorial archives, amazing art artists, and how-to techniques. And beautiful kid books.

I love my library. It fills my eyes. it fills my head. It fills my life.

I jus made myself bookplates for the Galesburg address. This is sneaky. I get to open every book, if nothing else but to put the plate in.

Take your inspiration where you find it, but build up inspiration where it waits for you, like treasure in heaven.

Painted Lace: The Real Thing

This week I painted a batch of lace and organza. I love using these soft laces because they offer texture and shifting color as another overlay on the surface.

These are not especially elegant laces. The organza is plain poly organza. I often find them in rummage sales. I hit the jackpot at some point when I bought a pile of remanents from a wedding seamstress.

Painting lace is easy. I use acrylic paints from Walmart or Joann’s and mix them with fabric media (available at Amazon) to make the hand of the fabric better. Mix in a little extra water until the paint is the consistency of cream, and paint the lace with sponge brushes. It’s a lovely, messy wildly colored afternoon. You let it dry completely and iron it on a synthetic heat setting.

I’ve heard a lot of people argue for the real thing. Silk organza. Real lace. I love those things too, but it’s not about fiber content. It’s about color, transparency, translucency, and texture. And it’s about whether they work well under the needle and as applique. It helps to know the content so you don’t burn it under the iron.

There’s a short story by Henry James called The Real Thing. It’s about an artist who has a noble couple offer themselves as models. They argue that they are the real thing and that they will add accuracy to his work as his models. But the truth is, he finds the woman who is his ordinary model from a humble and somewhat criminal life could be anything: a gypsy, a fairy, a queen, a courtesan, or a saint. And since she can be anything, she makes his artwork ultimately real.

Painted lace is a test tube baby, made of nylon and polyester. But it creates a wonderful surface overlay. And I really don’t care how real it is.

So, if you know of anyone who is rehoming white poly lace and organza, let me know. I finally used up my stash.

Applique Rescue: Hacks on Fixing Appliques

I work a lot with embroidered appliques. These are embroidered separate pieces I can apply to the surface of my piece. Because they’re separate, they don’t distort the piece as much, and they can be moved endlessly until you stitch them down.

I discovered several working hacks for applique rescue doing this. A 2-foot lily pad takes up way too much space to have as a double layer. It’s just too bulky, and I wanted to stitch frogs to the lily pads which would have made a very dense surface.. I’d heard about cutting out behind appliques, but I hadn’t tried it before. It worked quite well. I was able to stitch down my frogs without an extra layer of felt, stabilizer, embroidery, and hand dye. I was worried about the integrity of the piece, but once it was stitched and trimmed, it was quite stable.

This works if you’re sure of what you have designed. What if you stitch it down and change your mind? Artists call this pentimenti. The artist chooses something and changes their mind. On a painting, it would be a layer underneath with different images. On fiber art, it’s a series of small holes where you ripped something out.

This was a week of set backs. I’ve been working on finishing the purple heron. When I get towards the end, I sometimes make decisions I regret.

This happened with my purple heron this week. I was working with some larger lily pads than I usually do, and I put them in first before the heron. In between the heron and the lily pads were the butterflies. When I finally got the heron stitched in, the butterfly was way too close and personal.

Removing an applique is a drastic thing to do. It’s been stitched down with a free-motion zigzag stitch that is quite dense. I’ve done it with a mustache trimmer. I also love my surgical scalpels. That’s what I used here. You can cut through the stitch on the backside. I have a layer of protective felt and stabilizer between that and the front.

But be prepared for holes. I hoped the needle holes would shrink when I steamed the piece. Not enough.

Here’s another rescue. A roll of tape can remove a lot of excess thread after ripping out.

Not to worry about the holes. I got out some left-over spirals and placed them in a design where the hole was. What hole? After that, I replaced my butterfly in a better spot.

Here it is fixed. I need to stipple in the water next.

,Does it happen to me? Of course, it does. Rather regularly. But it isn’t what goes wrong with a piece of art that defines it. It’s what you do after to fix it.

Free motion Applique: following the Curve

This is under the heading of sneaky secret tricks. I rarely use an applique foot for applique. Instead, I use my darning foot and cover the raw edge in a free-motion stitch.

Why? Mostly because I rarely use a straight edge in my work, except for borders. I’m a curvy girl and I think in terms of curves.

I wanted a curvy vine for my butterflies to fly over and for the flowers to nestle into. layered on another piece of green hand dye, stitched out my vine in a straight stitch, and cut away all the excess. It’s best to get rid of all the extra fabric you can. I use pelican scissors to trim as close as I can get to the seam. Pelican scissors have an odd bend that lets you cut right on the edge.

Then I picked a light, dark and medium set of threads for the edge. Vines have two sides, and one can be done light and the other dark. If it’s a complicated vine, it may take a wider range. You want colors that could be the same if they were in a darker or lighter environment.

Stitching the top and bottom line of the vine in different colors gives it a visual distinction that makes it look dimensional. And because it’s free motion, the line is fluid and follows the curve more graciously.

Here’s my piece, almost ready to back and bind. Free motion applique is just what a curvy girl ordered.

Rethinking Cut-Away Applique

Most of the time when I applique fabric, I use a fusible like Steam a Seam 2 and I cut out my shapes. Except when I don’t.

Cut out applique works well for smaller, stable pieces that can be cut and moved around. Cut-away applique is better for elegant curved lines you just can’t cut out and move around..They shim out of shape too easily. And then they never lie flat.

Direct Applique

  • Attach a layer of fusible to the applique
  • Cut out the object before you glue
  • Stitch down free motion zigzag
  • 1 step process, just stitch it on
  • Thicker lines

Cut- away Applique

  • No fusible glue
  • Lay down a sheet of applique fabric
  • Straigh stitch in the design on top
  • Cut it away excess fabric
  • Stitch it down free motion zigzag
  • 2 step process
  • Softer, smoother lines

For this frog, I wanted a sinuous curved vine with curlicue tendrils. Not something that is easily done in direct applique. Larger cut-away applications can distort a bit. If we put a layer of the applique fabric over the top, stitch it down and cut it away, it’s a much cleaner, smoother line.

In cut-away applique, we stitch the design on an extra layer, and then cut-away what the excess.

Then we stitch down the edge with a free-motion zigzag stitch that can be smooth and lyrical like the design itself.

Here is the cutout vine ready for applique. What has changed? I used to draw and cut the leaves as well. I’ve done those separately to avoid some of the distortion.

Cut-away applique with Lace

The same process works with these lace butterflies. Rather than glue them on, and have the glue show through, I stitched around them straight stitch and then cut away the excess fabric. I had though I was adding butterflies, but I think they look more like the shadows of butterflies, which is much more cool.

Cut-away works as well with lace. These butterflies were part of a lace fabric. I stitched down the leaves and bugs, cut away the background, and stitched down the lace with a small free-motion zigzag stitch.

These techniques are neither right or wrong. It’s about using different techniques to get the results you want. It’s all a part of your tool box, for you to use as you want.