stitchery

Translucence: Making Stitchery Look Transparent

| ellenanneeddy

I’ve been rethinking how I usually make my dragonflies for my quilt Great Blue. I picked up some new research books and I was struck how very transparent and translucent their wings were. How could I do that?

Dissolvable stabilizer really is transparent and has that look. But it’s made to dissolve if it gets wet. I can’t promise that won’t ever happen. Humidity itself might dissolve the stabilizer.

I’m pretty sure Saran Wrap would tear. Sure enough not to try it.

I I have used organza or lace. It’s a neat look and I like it. But I wanted a more integrated stitched effect. I wanted them to appear to be see-through.

So I thought about it in terms of thread choices. I love Madeira Supertwist. It’s my go-to metallic thread. There are several color ranges. One range is of solid metallic colors. But one of the color ranges is opalescent and crystal. It’s translucent in itself. So I used it in the transparent part of the wings, and the metallic parts in the exoskeleton of the dragonflies.

It doesn’t look transparent exactly. It looks reflective, like glass or water. Not quite what I had in mind, but I think it does the job.

Here’s the difference. This bug is out of solid metallic thread. It makes a bolder statement, more like an exoskeleton than like see-through wings.

All stitchery is a gigo proposition. Good things in, Good things out. When you use excellent threads and get excellent although sometimes unexpected results. I’m going to try these crystalline threads in other ways where I want a translucent look.

FS2/20: The Thread That Looks Like Beading

| ellenanneeddy

Most of my work centers around threads, so I fuss about them quite a bit. Most threads divide into their components: metallic, rayon, cotton, and polyester. Fs 2/20 is a bit different. It has a black core the metallics are wrapped around and when it’s used in zigzag embroidery looks like little beads.

Madeira Threads Metallic Thread Color Chart FS 2/20

These lizards were stitched as bobbin work, out of FS 2/20. The eyes are sliver.

\

In contrast, these butterflies were all out of Supertwist Madiera metallic, with FS 2/20 bodies. Again, shiny Sliver eyes.

Why does all that matter? Because those three kinds of thread offer a totally separate look that makes the objects embroidered in them automatically different from each other. Your eye sorts for shiny first. That means that first, it sees the shiny eyes, then the supertwist butterflies, and finally the rich beaded looking lizards. Now, how cool is that?

FS 2/20 is not an easy thread to find. To my knowledge, you need to get it from Madeira. But I do think it’s one of the most beautiful threads I know of. They also have Poly Neon and Supertwist and a bevy of embroidery stabilizers.

For more information about using different kinds of thread, check out Shimmer: Defining the Background.

Wake It Up! Sparking Color With Overstitching

| ellenanneeddy

I love creating color with thread. The threads available make an endless choice of colors. You’re eye blends the bits f thread that peek out from their layers. It makes colors that are rich, dense, and complicated. What’s not to love?

But sometimes it gets too monochromatic. I was working on this heron and I wanted some fish companions for him.

When I picked out my threads for these, I wanted them red to stand out from all that grey in the heron. Red is funny. Like every color, it can lean either to the sun or the shade. A balanced red would use threads of both tempuratures. I used both kinds, a little purple and teal for shaders. And I threw in a green just to spark it.

By the time I got to the green, the whole mass was bland. Pretty. Stripy. Bland. I put in the green and it just woke up. Then more reds and finally oranges.

The green stitching on top is garnet stitch, in small circles. It changed everything!

Yellow overstitching creates a swirl on the fish face that helps round the face. Overstitching adds a color layer, but it also breaks through that bland smooth color.

It helps, of course that the yellow complements the purple, and the green complements the reds. But the textural elements also wake up the fish and feed our eyes.

Seeing Right Through: Applique with Sheers

| ellenanneeddy
Splash! in process

I know it’s not supposed to be quilter’s fabric. Sorry. I can’t leave it alone. It’s too much fun to play with test tube babies. Over the years I’ve collected a special stash of laces, organzas, chiffons, brocades and just plain weird stuff.

It’s not anything I would piece. But no one would call me a piecer so that’s moot. But it’s wonderful for the things in this world that are, by nature transparent and/or translucent. I’ve talked earlier about finishing sheer edges with a soft edge finish, Sun Rocks, Wind, Water: Elements with Soft Edges.

But there are times you want that edge to show. Edging lace and sheer applique is a way of not only defining the edge of the applique but of controlling the color and controlling exactly how transparent it is.

I’m working on some moonflowers and some snow drops for a quilt called Splash. The quilt features a dark mostly blue background, and I wanted glowing white flowers for the background. Moonflowers are morning glories that bloom only at night. They’re perfect.

It’s also a way of lightening a darker quilt.

I used both lace and organza for my flowers. I do like them to have small differences, so they have their own individuality. Then I placed them with Steam a Seam 2 on a piece of white felt, with some green leaves. Why felt? It’s a spectacular stabilizer, with a layer of Stitch and Tear underneath. Why white? Because it’s all going to show. Whatever color felt I put under the lace will show through and define the color of the finished flowers. Organza will show through the most, lace less so, and Angelina fiber the least.

Knowing that is power. Felt comes in a full Crayola box of colors and it allows me an extra layer of shading in the process. The thread I use will also define the colors and shade things into darks and lights. Here’s a collection of flowers with different backing felt colors.

white over pail blue
angelina fiber
white over pale blue
white over pink
white over white
White on White
white over turquoise

I use a number of pastels as well as different whites to stitch the edges to give depth. As usual, it’s darker where the sun isn’t shining.

shading the flower

I stitched the flowers with a free motion zigzag. Here’s a little video showing how that works.

I did these moonflowers separately from the piece because they’re relatively large and would have distorted the surface. But for the smaller snowdrops, I applied them directly with Steam a Seam ad then stitched on them directly. The cool thing about this is that the background peeks through, like all translucent flowers. It’s a cool effect.

snowdrops directly on the fabric

And it’s a great reason to play with sparkle lace. There should always be a reason for sparkle lace!

Hard Edge Applique: Redefining the Line

| ellenanneeddy

We talked earlier about soft edge applique. Soft edge is a minimal treatment that simply covers the edge of an applique with monofilament nylon or poly thread with a zigzag stitch. For things like water, air, fire, rocks, mist, suns and moons it’s perfect. Sometimes it’s good for flower petals as well. It’s for anything that doesn’t need a hard defining edge. It creates soft color shifts across the quilt.

But some things need that edge. Bugs, birds, frogs and fish all need that hard definition. Or you can’t really see them at a distance. And it makes a huge difference when you go to photo your piece.

You know I’m a color girl. I’m going to want to use color every time I can. But over the years I have learned, if you want it to stand out, use the black for an outline.

green outline
black outline

I particularly have tried it with bugs. Metallic thread green thread always gets my attention, and I reach for it much in the way you might reach for cherry cordial chocolates. But I’m mildly disappointed with it in the end, because it never gives as defined a space.

basic outline

I’ve been working on this egret, and the my process shots reminded me how important that outline is. Again, I’ve been working on doing a dimensional white bird, so it has a lot of contrast underneath to shade to white on the top.

The bare bones outline define the areas to shade with color. I’ve come to rely on 40 weight Madeira Poly neon. It comes in several blacks, but the definitive one is color #1800. I’m using a free motion zigzag stitch to outline, which is why the width is variable. (See post Zigging Upended for a tutorial on zigzag stitch).

I build color, from dark to light from the outline. For more information about choosing those colors, check out this post: Into White: The Search for White Thread Painting. But it’s coloring within the lines. As you can guess, I’m not so good at that. The threads encroach over the line and things get mushy. So the final act is that reoutline.

Redefining the outline

You can see the difference that second outline makes. All the edges that are fuzzed and mussy are now tightened up and out there.

The outside edges will be defined as I stitch the bird down. But having the inner edges cleaned with an extra edge of stitchery redefines all the lines.

finished egret

When I applique the bird on, again I’ll use my zigzag stitch with black thread. It gives the outline definition and punch and helps separate the bird from the background.

Over and under: three dimensional leaves

| ellenanneeddy
The leaf is all one piece of fabric. The threadwork defines the fold.

If you’re making nature quilts, you’re likely to need to answer the leaf question. Leaves ripple and rumple and almost never lie flat. And they fold. How do we make that happen on the quilt surface?

Here some approaches.

defined by stitch

I tend to use a free motion zigzag stitch mostly to apply leaves. It’s fluid. It follows curves. And I can change color at will. I also tend to use a polyester Neon embroidery thread by Madeira. It’s strong, bright as a button and light enough to stitch over several times until I get what I want.

Dividing a leaf in half and coloring it with one side dark and the other light creates an immediate sense of dimension for this quilt. It’s the same fabric, but the coloration changes with the thread choices.

defined by applique method

Direct applique is applied right to the top of the piece with glue. I use Steam-A-Seam 2 by preference because it allows me to move the piece around before I iron it into a permanent place.

This makes simple shapes easily. But it doesn’t allow for wild curves and vines

The leaves are drawn on a separate fabric and stitched to the top. Then the access is all trimmed away.

cutaway leaves

Cut-away applique is done with a cloth laid over the top and stitched in the shape you want. Then the leaves, vines and trees can be cut away along the stitch line, leaving more fluid shapes.

Leaves formed by cut-away applique continue the background shading through peek-a-boo holes.

Cheesecloth leaves

The sheer qualities of cheesecloth and the texture mimics the cell structure of the leaves and lets bits of the background through. Cheesecloth makes fabulous leaves and can be dyed any color with Procion dyes. The wild stitching with lime and orange makes them look crinkled.

Making the leaf fold

This cheesecloth leaf folds along the darker blue line of thread. The threadwork itself defines the fold. The purple line on these leaves folds the center and the two slightly different thread colors top and bottom help confirm that.

Mostly leaves are defined by threadwork. These are some ways to make leaves look like they popped out of the background. And that’s pretty much what you want.

Lighting the Spark: creating thread images with contrast

| ellenanneeddy

Threadwork is delicate. Just because threads are tiny thin things. Just by their nature.

We can layer threads infinitely. But singularly they don’t have a lot of effect. So how do we keep threadwork from mushing into a soft blend? We need a spark. If we take just light and dark shades of a color, that’s a good start. But it’s bland.

What makes a spark? Contrast. Either in color, in shine or in temperature. High contrast keeps it from being dull. And since thread is such a little thing, it we can use intense contrast without overwhelming the piece.

sheen

The first thing we see with thread is it’s sheen. How shiny is it? Threads come from dull cottons, to smooth rayons and polys to sparkly metallics. The eye sees the sparkle first.

So if we want something to stand out, something really shiny will make the spark. Which is why I use Sliver, and a number of other flat shiny threads.

If you’re doing animals, you want their eyes to be the thing you see first. Sliver does that. You make an iris of any color, a black pupil, and a small iridescent spark inside the eye. It’s a spark inside a spark. And it brings an eye to life.

Or I can make my background shimmer by stippling sliver in gradated colors across the piece. Sliver is a delicate thread. It works best in a regular bobbin case. I use a matching polyester thread on top. If I stipple pretty much last, all the other stitching tells me where the stippling should be.

color

Color contrast always startles the eye. The highest contrast in color is always going to be the complement. Complements are powerful. The blue and peach make a spark between them to shade this bird.

The pinks are sparked by the yellow green overstitching that makes the feathers an flowers.

temperature

The hot gold details stand out against the smooth greens and blues and lights up the feathers.

black and white: Contrast in Value

Both black and white are extreme contrast. For threadwork, I’m careful of both of them. But they give us an edge. I almost always outline in solid black or black metallic. But on the raven’s wings, I overstitched the feathers with black to make them pop.

Contrast is always what makes our heads turn, our eyes turn, our hearts beat. And that’s the point to art, isn’t it?

FENCED IN: Making Fences

| ellenanneeddy

Most artists have something they do specially. The secret to that is that special focus usually camouflages that which they are not good at. I’m no different. I can’t sew a straight line to save myself. So I don’t. I do nature images where straight lines aren’t a problem. I don’t do well on straight line piecing either.

Except that that is a limit. And I hate limits. So every so often I push past that and try no matter how bad I am at it.

I’ve been working on a garden series called bird feeders. The premise is that every good garden feeds and cares for everything that lives within that garden. And some things just don’t grow without support. Which means a fence. Of course I’m not talking about clean new straight fences. What fun is that?

I’m not good at fences. You should be able to piece a good fence. But I’m really not good at piecing. These are three things I’ve tried instead of that.

Years ago, I did a child’s book called Tigrey Leads the Parade. It was about my dog who ran away daily as an art form. Since it involved escaping from the yard, it involved a lot of fences. This is a fence, embroidered with #5 pearl cotton on a tea towel.

Tigrey Leads the Parade

I love these stitched fences. But they were tiny. When I wanted something bigger, I tried something with an oil paint stick rubbing. I found a border edging at Menards and rubbed the fence texture on to my background fabric.

Bird Feeder: Sunflower

I consider this a mixed success. I like the fact that the fence looks crooked and old. But the distortion, even with straight stitching and stabilizer was pretty ferocious. Were I to do it again, I’d use another layer of Stitch and Tear.

So when I went to do the next piece I had some left over gray pieces I’d used as sidewalk. I used them to make the fence. The wood grain stipple helps it, I think,

They didn’t quite work as realistically, but I think they made a good fence. And good fences, as Mr. Frost knows makes good neighbors. And better quilts.

Do I have it down yet? I don’t think so, but I think I’m closer. If we don’t push past our limits, the limits are real. No one wants that, right?

Fade to Black: Shading black objects for dimension

| ellenanneeddy
Envy

Black and white have the same problems. They’re absolute colors that are really harsh statements in their full form. I almost never do a completely black or white object because they are so overwhelmingly strong and so flat. They overwhelm instead of fitting in.

I’ve worked on creating a white dimensional bird out of different pastels and greys. You can see the result on this post, Into White.

But would the same approach work with black? Instead of using tinted pale colors to create depth, use toned darker colors to create shades of black and greys? That’s what I’m going to try. I’ll take step by step photos so you can see if it works.

Indigo Blues

Have I ever done this one this before? Sort of. I’ve done black before, but when it comes to the contrast shades I’ve turned to purple and blues all of which because they were in my stash were a bit bright. The effect was essentially a purple and blue bird. It’s a fun art statement, but it wasn’t what I was aiming for. I really did want black.

I found this great drawing of a raven I did years ago. It fits into my birdfeeder series, so we’ll see what we get.

This turned out to be hard. I ordered the darkest threads in blue, grey, brown, and purple for it. When they arrived they did look ugly.

The other hard thing was telling which were darker. The tones were very close. I used my red, and green color filters and did the best I could to arrange them dark to light.

The real question is, is this a brown/black raven or a blue/black raven? I’ve tried to mix both blues and browns for a neutral black.

It’s not uncommon for this process for the stitching to be discouraging. It doesn’t look really impressive half way through. So I’ve taken step by step photos so you can see the change.

It didn’t work the way I expected. I was quite disappointed. Then I did what I had planned in the beginning. I used black metallic as my last color. The last color is always your strongest color and the one you will see the most.

The final thing that helps this out is the background. I’m using this piece of hand dye that pulls towards the brown/grey shades even with the yellow reds in it. The color of your fabric is the light source of your piece. This background echoes the brown/blue/black quality of the bird.

Is this a final answer? It is for this piece. I want to play more with it after I’ve had a color fix working on something bright and showy. All these neutral darks are depressing, but I think I got my bird where he should be. I think he needs to be flying over conifers. Maybe I do too.