This is under the heading of sneaky secret tricks. I rarely use an applique foot for applique. Instead, I use my darning foot and cover the raw edge in a free-motion stitch.
Why? Mostly because I rarely use a straight edge in my work, except for borders. I’m a curvy girl and I think in terms of curves.
I wanted a curvy vine for my butterflies to fly over and for the flowers to nestle into. layered on another piece of green hand dye, stitched out my vine in a straight stitch, and cut away all the excess. It’s best to get rid of all the extra fabric you can. I use pelican scissors to trim as close as I can get to the seam. Pelican scissors have an odd bend that lets you cut right on the edge.
Then I picked a light, dark and medium set of threads for the edge. Vines have two sides, and one can be done light and the other dark. If it’s a complicated vine, it may take a wider range. You want colors that could be the same if they were in a darker or lighter environment.
Stitching the top and bottom line of the vine in different colors gives it a visual distinction that makes it look dimensional. And because it’s free motion, the line is fluid and follows the curve more graciously.
Here’s my piece, almost ready to back and bind. Free motion applique is just what a curvy girl ordered.
Whenever you do any kind of representative art, you end up needing to do your research. Does the frog have three toes or two? Does it matter?
Sometimes it really does. Sometimes it really doesn’t. But it’s always more impressive to get your details right.
I do water lilies a lot. Lotus, not so much. And I’m really not sure why. But for this quilt. I want lotus, with their big stand-up pads and their flowers standing proudly on their stems. I need the vertical motion of them.
So I went looking for pictures. When I did, I found lotuses and waterlilies side by side in the search for lotuses. So what is the difference?
I decided it was in the way the petals curved inward, Instead of having a petal shaded differently on each side, I shaded them so that the shadow was in the middle of the curve.
Each quilt gives me an opportunity to explore the shapes, colors, and shadings.. We look as artists for formulas that we can use. But in the end, it’s all observation set in the colors we play with. And a dance of choices, individual but built on all the choices before.
For some while I’ve been wanting to make reflections in water, and work with shadows. I also have usually only done river and pond water. This image made me want to break out into shore surf. The heron has her wings up, so that they distort the shadow and the fish won’t see her.
I’m a bit uneasy about what the surf should look like. So I did some research. I love Japanese art, and looked through some imagery on waves on shore. Sometimes it helps to have a good idea what something looks like. These drawings were great waves. They gave me a place to start.
I broke down the drawings into simple shapes. And I cut them in a lot of different blues, and a specific glistening white.
But I needed to make the shadow. There may be more sophisticated ways to do this, but I traced the embroidery onto Steam a Seam 2.
I’ve changed backgrounds a lot on this. I finally settled on something a bit brighter, so you could see sand and sky.
The first one I cut was purple. It simply wasn’t dark enough.
Black glitter tulle worked better. I patted on some glitter tulle and cut the shape out.
I cut out wave shapes and layered them together.
The sky is pure sun headed into greenery, and I didn’t want to do something bold with it. Instead, I added spirals heading from gold to green to feel like the sun shimmering down.
I’m pleased with this although I haven’t ironed it down yet. The placing of the heron is really delicate. So I’m looking at it for a while before I commit.
Things to know about layering sheers:
Sheers may look different once you’ve ironed them. Have a test piece so you know what it will look like.
Your Steam a Seam 2 will make your needle skip if it’s not ironed down properly. That’s harder to do with multiple layers. And if you use lace the glue will come through
Layered sheers take more ironing to stick. But you don’t want to melt them. Use a no stick pressing cloth to iron them down and clean it after each piece is ironed. I use a non-stitck Scotch-Brite Scrubby. When you are all done, lay a piece of cotton scrap over the top of it and iron on hot. The excess glue will melt into the scrap. Make sure you don’t transfer glue from the scrap to your piece.
Sheers make wonderful shadows. I’ll stitch all this down with monofilament nylon so there are no hard edges, just shadow, sun and sea.
I’ve never gotten over sheers. As I child, I couldn’t imagine how I could ever wear them. outside They required a life I couldn’t imagine. Or really want. Someone who sat politely in a clean room and was polite to incredibly stuffy people, who made a life of being “beautiful”. It never appealed. But organza! And sparkle fabric! And shot sheers? I was mesmerized.
When I started working at Vogue Fabric in Evanston, I was a quilter and a cotton girl. It was some while before I thought about what would polyester sheers look like on a quilt. But they were pretty. I think I saw Ann Fahl use some tulle on a quilt as shadows. It was eye-opening.
Then I got to thinking about the things that really were see-through. Mist, water, air, clouds, and of course, flowers. Yes you can applique sheers. They’re perfect for direct applique with fusibles.
I’ve been making flowers with sheers for a while. The technique is fused sheers on felt with a lot of free-motion zigzag stitching. It’s not hard. It is time consuming, but you have all the colors of thread for your crayolas. And it’s pretty.
The Sandwich
The surface you stitch on is the sandwich. For this technique I use a layer of Stitch-and -Tear, a layer of felt, and sheers and lace backed with Steam-a-Seam 2, I used to put in a layer of hand dyed fabric either to match the sheer or the background, but I’ve found it unnecessary if I’ve chosen my felt well. The color of the felt will naturally show through. That tends to accentuate the color of the flowers.
Working on a separate sandwich means I don’t have to worry about distortion.
Zigzag stitching always pulls up and distorts the piece. No matter how much it bumples up, I can cut the distortion away at the edge of my stitching and it will be flat enough.
The stitching on them is free motion zigzag gone wild. And the shading is made to make each petal individual and each flower its own star. The color of the flower is largely defined by the sheer and the felt behind it. But the shading of the petals is all threadwork.
For more information about making flowers from sheers, see
We worked with garnet stitch to do octopi several weeks ago. That was an all-over garnet stitch that could be shaded across the piece. But what if we want separate spots and smooth shading around them? How do we go about that?
What we need to do is to define the spot clearly, and then shade around it. But shading with one color around the spot negates a color range shade. We need to put in our spots and then shade around them defining different sides of the spot with different colors.
We start dark to light with the darkest threads first. The first color needs an outline stitch done at an angle to define the shape. Then we’ll shade out to the side, and then smooth the line between the outline and the shading.
But after that row, there’s more shading than outlining. When we come to each spot we outline the spot on that side and shade past the edges of it. Then in the next color row, we outline it from the other side and shade it into the earlier colors. The spot is clearly in the color range but it’s defined by the outline around it that fits the shading as it changes.
It’s a cool trick for including spots in a smooth range of colored stitchery.
This is a special week for me. After 10 years, I’m teaching in a guild again. I’ll be lecturing at Gems of the Prairie Wednesday, May 3rd, and teaching the class The Stitch Vocabulary Book on May 4th. The class is full, but I’m told the guild welcomes non-members for the lecture. You are all very welcome to come!
It’s my developmental lecture.: How I became an artist. That’s a misnomer by the way. We are artists by the way of being human. It’s how I stumbled into my own art, and where it has taken me.
Every year I try to do something I’ve never done before. for my birthday. This year, I’m teaching a lecture and class, after a ten-year hiatus.
And on May 5th, I turn 70. I’ve always dreaded that. It sounds so old. Yet here we are. And if you’re a contemporary, so are you. As someone quite wise said to me, “If you made it, you celebrate it.” I intend to.
My life has always been a bit upside down. I’m too dyslexic to do things in a rational linear order. I started doing my art in my 20s. I married at 62. I borrowed other people’s children, although I always gave them back. And I had a lot of physical limits. 10 years ago, I pretty much stopped doing art and wrote books instead. And then Don gave me his old house for a studio. And my art flared up like a forest fire. Only a bit less destructive. It was back.
Making art is an expression of vision. Teaching is the sharing of technique. They really aren’t very similar. But they balance each other on the see-saw for good art is always bound by technique, and the ability to share technique extends everyone’s ability to share vision.
In prepping for class, I’ve done some things I really haven’t done for a while. I wrote and published a new classroom book for the class. Classroom books are all about technique, and this one is chocked full of different ways to use free motion: zigzag stitching, straight stitching, garnet stitch, hard edge applique, soft edge applique and bobbin work, with extra chapters on silk flowers, globbing and Angelina fiber. Bookmaking is a skill. It was nice to come back to that again.
And I’ve brushed up that lecture. It was shocking to realize how much my technique had changed in three years. The revised lecture needed to cover that. My stabilizer techniques, my drawing techniques, and my stitching techniques are massively different.
To celebrate the class, I’ve put quilts on sale. I’ll have them at lecture and class but you can also purchase them on my Etsy site at www.etsy.com/shop/EllenAnneEddy
What was more shocking, was that I had enough quilts to do a full trunk show out of that three years of work, with no older work included. Old work is fun for a lecture, but I think my new work is much more exciting. Yes. I will let you touch them. It’s astonishing what gets done if you are doing it daily.\
My point is that life isn’t linear. It’s a spiral, just like time in a garden. It doesn’t start at one place and just go to another. It cycles, it stalls, it spins out, It shoots up. Flares down. But even when things stop, they come back again in a different form at a different time in a different way. I don’t think I need a thing for this birthday, except, note to Don, some new books. The journey is the gift.
You are so welcome to come to my lecture. for Gems of the Prairie. It’s at St Paul Lutheran Church 1427 W Lake Avenue, Peoria, IL, United States, May 3rd, at 6:30 PM. I’m bringing piles of fabric, books and hand-dyed threads so people can play with the toys I use.
All time is a spiral. Wait long enough and things lost come back in their own way and time. I am grateful.
The Thread Magic Stitch Vocabulary Book went up yesterday on Kindle and is now available! I’ve been sharing my chapters with you so you can get a taste. This is the classroom book that shows you most of the technique
es I use for my work.
I will be teaching the class, Thread Magic Stitch Vocabulary Book for the Gems of the Praire Guild in Peoria on May 4th with a lecture on May 3rd.
This is my first guild gig in about 10 years. There are a lot of reasons for that, and I don’t know that I’m back to a gig I have to travel for yet. But I am so excited to be back in a classroom, and I’ve found there are so many techniques that have changed or modified over that period of time. And so many more things I can do with those techniques..
So I did this booklet, especially for this class. But it should stand alone as a set of exercises you can use to build your skills and stretch your abilities. There is a full toolbox of free motion techniques you can include in your work with just a little practice.
You can see several chapters up on earlier blog posts.
Skills covered Free motion straight stitch Free motion zigzag Bobbin work Hard edge applique Soft edge applique Working with Angelina Fiber Working with dyed cheesecloth Couching Adding silk flowers and leaves Globbing
I tried to write a book that would cover a lot of information in a small space. I’m hoping you find it useful. You can order the Kindle Stitch Vocabulary Book right now. The print book will be out at the end of the month, and it’s part of your kit if you are taking the class.
I’m so excited to be sharing this material with you and to be out teaching again with the best people in the world. Quilters!
Most people don’t think about free motion being an applique technique, but it gives you lovely curved edges with great textural lines. Here’s a sneak peek of the chapter on Hard Edge Applique.
I’ve been rethinking how I usually make my dragonflies for my quilt Great Blue. I picked up some new research books and I was struck how very transparent and translucent their wings were. How could I do that?
Dissolvable stabilizer really is transparent and has that look. But it’s made to dissolve if it gets wet. I can’t promise that won’t ever happen. Humidity itself might dissolve the stabilizer.
I’m pretty sure Saran Wrap would tear. Sure enough not to try it.
I I have used organza or lace. It’s a neat look and I like it. But I wanted a more integrated stitched effect. I wanted them to appear to be see-through.
So I thought about it in terms of thread choices. I love Madeira Supertwist. It’s my go-to metallic thread. There are several color ranges. One range is of solid metallic colors. But one of the color ranges is opalescent and crystal. It’s translucent in itself. So I used it in the transparent part of the wings, and the metallic parts in the exoskeleton of the dragonflies.
It doesn’t look transparent exactly. It looks reflective, like glass or water. Not quite what I had in mind, but I think it does the job.
Here’s the difference. This bug is out of solid metallic thread. It makes a bolder statement, more like an exoskeleton than like see-through wings.
All stitchery is a gigo proposition. Good things in, Good things out. When you use excellent threads and get excellent although sometimes unexpected results. I’m going to try these crystalline threads in other ways where I want a translucent look.
